FODSPORTS BT-S2Pro, User Manual

Page: 12 / 88

To Pair 3 Devices in Intercom Mode
1. Follow the above procedure for each combination of the three units.
(A-B, B-C, A-C).
2. Ensure the third unit is switched off when pairing the other two devices.
For example: When A is paired with B, C is turned off. When B is paired
with C, A is turned off. When A is paired with C, B is turned off.
3. Only 1 connection can be live at a time. Please follow the above steps to
pair A-B, B-C,A-C.After pairing A and C successfully, press A's power button
once, that means A and C exit the intercom mode. At this time, A, B, and C
are in standby mode, B acts as a bridge. And then press A's power button
again, A Enter the intercom mode with B. Press A's power button twice, A
Enter the intercom mode with C. Press C's power button once, B and C
enter the intercom mode.
4. From Standby press the power/intercom button 1 time for one of the
pairings to be called, or 2 times for the other pairing to be called.
S. The pairing for 1 or 2 presses will depend on the sequence in which you
paired the 3 helmets, but once paired the relevant pairings will maintain
the number.
6. i.e. A will press the power/intercom button 1 time to call C and 2 times
to call B. B will press the button 1 time to call C and 2 times to call A. C will
press the button 1 time to call A and 2 times to call B.
About the second pairing
When you unintentionally turn off the intercom or need to use for a
second time, You can do as following :
1. Turn on the two intercoms at the same time, then will see the blue lights
flashing.
2. Please wait 5-6 seconds after the blue lights flashing.
3. Then press the"power button" of any intercom, after 3-6 seconds, blue
lights on both devices flashing at the same time and remain alight. for
10