10
E
N
G
L
I
S
H
Split + Digital Record Mode *
Split ‘Mix Down Mode’
Stereo ISA430 Units
Switch unit to SPLIT.
Insert 2 channels of console,
one as EQ, the other as
Dynamics.
Mix down to digital using
ISA430 A/D and Limiter section
for high quality digital master
Send audio from second ISA430
to A/D Card in first ISA430.
This configuration creates a
stereo record channel with only
one A/D Card required.
A/D Card fitted
No A/D Card fitted
Stereo control of
Dynamics section
This example shows how to link two ISA430s together, allowing them to be used as a stereo record channel. (Stereo dynamics processing and
dual mono EQ (can be used as a stereo channel.)) The stereo channel can then be routed to a single optional ISA430 Digital Output Board
allowing A/D conversion of the stereo signal.
This example shows how to use the ISA430 in split mode as a mixdown tool. The ISA430 is simultaneously allowing EQ processing on audio
from the console (CH1) and Dynamics processing on audio fromthe console (CH2) and allowing A/D digital conversion of the final mix fed
from the master L/R console outputs. (Requires optional ISA430 Digital Output Board.)
This example shows the insert send feeding the “External I/P A/D Direct” input. This allows an analogue input to be connected to the insert
return, and then routed, via the dynamics modules, to the digital output.
* Requires optional ISA430 Digital Output Board.
ISA 430 Manual (multilanguage) 20/1/2000 9:07 am Page 10
