TView Pro AV 1600 User's Manual Rev 1.02
19
3.2 Internal Adjustments
The following adjustments are internal adjustments. These controls require the user to remove the TView Pro AV
1600’s cover and make the indicated adjustment with an adjustment tool.
3.2.1 Color Burst Level VR1
This potentiometer adjusts the amplitude of the Color Burst.
3.2.2 Output NTSC Pedestal VR2
This potentiometer adjusts the level of the NTSC Pedestal.
3.2.3 RGB Output Level VR9
This potentiometer adjusts the RGB Output Level
3.2.4 FSC-403 Reference Voltage VR10
This potentiometer adjusts the Voltage Reference on the FSC-403 chip.
3.2.5 Sync on Y output Insertion JP6
This jumper determines whether composite sync is inserted on the Y output. Connect the 2 posts of this jumper
together to produce sync on the Y output. Sync is always available on the dedicated component sync output
connector. The factory default is Sync on Y selected (Jumper JP6 installed).
3.2.6 Pal GenLock Trim Cap C6
Adjusts PAL color frequency
3.2.7 NTSC Genlock Trim Cap C11
Adjusts NTSC color frequency
