iTView Mac User’s Guide
18
Hardware Installation
accept audio input from your computer. To utilize this function,
connect a standard 1/8" male mini stereo cable (not included) to the
female connector attached to the larger end of the SCART cable.
To connect the iTView Mac unit to your television, perform the
following steps:
1.
Connect one end of the supplied composite video cable to the
“Comp Video” port located on the side of the iTView Mac unit, or
connect the male end of the S-Video cable to the port on the
side of the iTView Mac labeled either "SCART/S-Video."
2.
Connect the other end of the composite cable or S-Video cable
to the Comp Video in or S-Video in port at on the television.
3.
Turn the television on and set the TV to the composite S-Video
input mode. (See TV’s owners manual for more info)
4.
Plug in the power adapter for the iTView Mac.
5.
Turn your computer on. If the cables have been connected
correctly, the image from the computer monitor should now
appear on the television screen.
Note: The TV input mode is an important step. Therefore if you get
no image or see snow on the TV concentrate on this issue. As
always if you have not used this connection before consult your TV’s
owners manual
