Focus Firestore FS-2, User Manual

Page: 121 / 146

FS-2/2E Studio DTE Disk Recorder User Guide
101
FS-2E Web Interface
4.2 The Web Interface
4.2.1 Recorder/Player Controls
The Record and Play buttons function in the same manner as controls on a
video tape recorder (VTR) and the control panel buttons on the front of the
FS-2E, see
Front Control Panel
on page 8 for more information.
4.2.1.1 Record
1.
Verify that the input device is connected to the FS-2E.
Refer to
Setting Up the FS-2/2E
.
2.
Verify that the FS-2E is properly configured to record.
Refer to
Recorder Configuration
on page 105.
3.
Select a video source and display it on a monitor.
4.
Click on the
Record
button to start recording.
5.
To pause recording, click on the
Pause
button.
6.
To resume recording, click on
Record
time.
7.
To create a new track without stopping the recording, click
on
Record
while recording.
8.
Click on the
Stop
button to halt the recording.
If allowed to run on its own, the FS-2E continues recording
until the hard drive reaches full capacity and then stops.
4.2.1.2 Playback
1.
The method of playback depends on the
Playback Mode
selected in
System Configuration
, see page 108.
2.
In Track mode, select a track in either the
Tracklist
, see page
103, and click the
Play
button. The track begins to play.
3.
Click
Play
and the playlist begins playback.
4.
Click
Stop
to end playback.
Rewind
Next Track
Forward Play Pause Stop Record
Previous Track