Focus Firestore FS-2 Page 46 User Manual Download

Page: 46 / 146

FS-2/2E Functions

FS-2/2E Studio DTE Disk Recorder

User Guide

2.4 LCD Display

The FS-2/2E LCD screen displays different FS-2/2E modes and states. On boot up,

the FS-2/2E displays the following screen:

Depending on the connected disk drive, the FS-2/2E may or may not display

Please Wait

during boot up.

Once booted, if no disk drive is connected to the FS-2/2E (either through the

internal slot or externally using the HDD I/O port), the following screen appears:

Insert a drive into the front panel drive bay or connect a FireWire disk drive to the

HDD I/O port.
If you received a drive from Focus Enhancements, it should be configured and

ready to use. If the message

No Disk Detected

appears, make sure the drive is inserted

properly.
If the message

No Format Detected

appears, you must partition and format the

inserted drive before use. The FS-2/2E prompts you through the steps required to

perform a format.

Warning: Formatting and Portioning Erases All Data On the Disk.

WELCOME

TO FS-2E

PLEASE WAIT

NO DISK

DETECTED

Summary of Contents for Firestore FS-2



















































































































































Search results

Summary of Contents for Firestore FS-2

Reviews:

Related manuals for Firestore FS-2

Brands by name

Popular brands

Focus Firestore FS-2, User Manual

Search results

Summary of Contents for Firestore FS-2

Reviews:

Related manuals for Firestore FS-2

Brands by name

Popular brands