TView Gold Card User’s Guide
16
Software Installation
will need a special adapter called an RF Modulator. This device
converts the Composite Video signal from the TView Gold Card unit
to an antenna signal. The RF Modulator is not supplied. FOCUS
Enhancements Technical Support recommends using the Radio
Shack RF Modulator (Radio Shack part number 15-1283).
Note: When using an RF Modulator, the TV may have to be set
to a particular channel (for instance, 3 or 4) to accept the
TView Gold Card's video. Or, in some cases, you may
have to specify input using the TVs on-screen
programming feature. If you are unsure about how to set
your television to accept external video through the
Antenna In, refer to the television owner’s manual.
To connect the TView Gold Card to your television using the RF
Modulator, perform the following steps:
1.
Connect the RF Modulator to the coaxial input at the rear of the
television.
2.
Connect one end of the composite video cable to the matching
port on the TView Gold Card cable.
3.
Connect the other end of the composite video cable to the RF
Modulator’s Composite Input at the rear of the television.
4.
Plug RF modulator into wall outlet or surge protector
5.
Turn your computer on.
6.
Turn the television on. If the cables have been connected
correctly, the image from the computer monitor should now
appear on the television screen.
