Before carrying out any of the following operations, ensure that the fire is OFF and completely cold.
FIREFRONT - Any dust accumulating in the firefront may be removed using a vacuum cleaner or dry cloth. Heavy stains may be
removed by using a damp cloth and mild household detergent. Brass parts of the firefront may be cleaned using a suitable brass
cleaner. Replace the front centrally against the fire after cleaning. Do not use a damp cloth to clean cast iron fronts.
PAINTED AREAS - These can be cleaned using a dry cloth.
COALS AND CERAMICS - Remove the firefront and place to one side. Remove the ceramic components. Gently clean in the
open air. Be careful not to create dust from the coals. Where necessary replace damaged components with genuine spares. Seal
scrap components in plastic bags and dispose of at proper refuse sites as directed.
Re-fit the ceramics carefully by referring to the relevant section of these instructions.
Handset - Remove cover from rear of handset and insert 1 x ‘PP3’ (9 volt) battery - Replace cover.
Before carrying out any of the following operations, ensure that the fire is OFF and completely cold.
Appliance - Ensure appliance is off and cool. Remove cover from top of receiver box.
The cover is protected by reflective foil, and located towards the right hand side, underneath the burner unit. Insert 4 x ‘AA’ (1.5
volt) batteries - Replace cover.
9.0 CLEANING
8
'
2013 Focal Point Fires plc.
GB IE
10.0 REPLACING THE BATTERIES
(REMOTE CONTROL VERSIONS)
11.0 LIST OF REPLACEMENT PARTS
Item
Part number
Pack of 16 coals
F550038
Pack of 16 pebbles
F550050
Pack of 9 ceramic logs
F550084
Front ceramic strip - coal
F780008
Front ceramic strip - pebble
F780017
Front ceramic strip - Log
F780050
Ceramic combustion matrix - coal
F780007
Ceramic combustion matrix - pebble
F780016
Ceramic combustion matrix - Log
F780051
Oxypilot 9081 - All models
F730006
Gas valve - manual control models
F730085
Gas valve - remote control models
F730011
Injector - stereo 76 - manual control models
F730091
Injector - stereo 81 - Remote control models
F730046
Burner assembly - complete - manual control
TRAYEXCELC
Burner assembly - complete - remote control
TRAY017
