2021
NOTE:
1.
Mantel
2.
Logs
3.
Remote control
4.
Heat settings
5.
Flame effect
6.
Fire ON/OFF
7.
Power Switch
DOWN
LIGHT
button 3 seconds to turn on
This product without downlights.If the product without downlights function, press
the downlights function is invalid.
STEP2
STEP3
Once the brackets are in position, centre and level
the suite into its final fitting position, mark with a
pencil on the wall where you wish to drill. Remove
the suite and prepare the wall from the marked
positions. If using the fixings supplied, drill a hole in
the wall using a 5.5mm drill bit. If not, use a suitable
drill bit for the wall plugs you are using.
Insert the wall plugs into position. Offering the suite back
up into position against the wall, you are now able to
secure the suite to the wall using the 4x30mm screws.
Wall
Floor
