2021
STEP1
brackets A 2pcs
screws B 3x12mm 4pcs
With a pencil mark out the desired height where you
would like the brackets(A) to be situated on the rear of
the legs, to avoid splitting the leg, pre drill the bracket
holes with a 2mm drill bit. Now attach the brackets to
the legs using the 3x12mm screws(B).
Please note: Before drilling into wall, always
check that there are no hidden wires, pipes, etc.
Make sure that the screws and wall plugs supplied
are suitable for supporting the unit to the
surface. Consult a qualified person if you are not
sure.
