Manual Operation
STEP I : Plug in and turn the mains power supply on.
STEP 2: Turn the on/off switch on the right hand side of the the heater outlet to the "I" position.
STEP 3: Press the power button to the turn on the appliance.
STEP 4: Press the 'FLAME' button to select the desired flame brightness; there are 3 different brightness levels available.
STEP 5: Press the 'HEAT' button once to activate the low heat setting; press it again to activate the high setting, press it a
third time to switch the heat setting off.
STEP 6: Activate the standby mode by pressing the power button again.
STEP
7
: Switch the fire off by turning the on/off switch on the right hand side of the heater outlet to the "0" position.
Remote Control Operation
STEP I: Switch on the appliance using the ON/OFF switch
STEP 2: Press the power button on the remote control; the LCD display will illuminate.
STEP 3: Press 'FLAME ' on the remote control to select the desired flame brightness; there are 3 different brightness levels
available.
STEP 4: Select the desired heat output by pressing the relevant heat setting button:
To activate the low heat setting, press 'HEAT I'; press it again to turn it off.
To activate the high heat setting, press 'HEAT II'; press it again to turn it off.
AUTO Control Function
Press the '+ ' button on the remote control to increase the set temperature.
Press the '-' button to decrease the set temperature. The temperature can be set between I 5-30
°
C
Press 'AUTO ' to activate the automatic control function. The appliance will automatically activate / deactivate with the
following functions
- If the room temperature is higher than the set temperature on the appliance, the heat will turn off.
- If there is no operation for a few seconds, the remote control will show room temperature.
- When AUTO mode is turned on, the HEAT I and HEAT II buttons are invalid.
Setting the Current Day and Time
The day and time can only be set using the remote control.
STEP I: Press the 'DATE Tl ME' button on the remote control; the day of the week will flash. Use the up and down buttons to
set the day of the week. Once the current day is set, press the 'DATE TIME' button to confirm the current day.
STEP 2: The hour setting will then flash once the day has been selected. Use '+' or '-' to adjust the time until the current
hour is selected. Press the 'DATE TIME' button to confirm the current hour.
STEP 3: Then the minute setting will flash once the hour has been set. Use '+' or '-' to adjust the time until the current
minute is set correctly. Press the 'DATE TIME' button to confirm the current minute.
Setting the Heat Timer
Press the 'TIMER SET' button on the remote control; the time cycle number will flash. Use the '+' and '-' buttons to cycle
through the different timer cycles from Oto IO and press the 'TIMER SET' button to confirm. A small black triangle will flash
below one day of the week , indicating that the day of the week need to be determined.
-Press the "CLEAR "button can cancel the set time conveniently.
Selecting the Day
STEP I: Press the up or down buttons on the remote control to choose the set day between 'SUN' to 'SAT',the default day
is 'SUN'. Press the '+' button to confirm the set day. Press the 'TIMER SET' button to confirm.
STEP 2: Repeat STEP I to add other days to the chosen timer cycle, or press the '-' button to delete the set day. Press the
'TIMER SET' button to confirm.
Set TIMER ON Time
The 'ON' symbol will illuminate on the LCD display to indicate that the Timer ON will need to be set.
STEP I: Press the '+' or '-'button to set the hour setting for Timer ON and press the 'TIMER SET' button to confirm.
STEP 2: Press the'+' or'-' button to set the minute setting for Timer ON and press the 'TIMER SET' button to confirm. The
'ON' symbol with turn off and the 'OFF' symbol will illuminate.
Set TIMER OFF time
The 'OFF' symbol will illuminate on the digital display to indicate that the Timer OFF will need to be set.
STEP I: Press the '+' or '-' button to set the hour setting for Timer OFF and press the 'TIM ER SET' button to confirm.
STEP 2: Press the '+' or '-' button to set the minute setting for Timer OFF and press the 'TIMER SET' button to confirm.
© 2021 Focal Point Fires Ltd.
