44 |
P a g e
WARNING: RE-USING OLD BATTERIES OR MIXING OLD AND NEW
BATTERIES IN THE IN-CAR UNIT MAY DAMAGE THE ELECTRONICS.
9
Trouble Shooting Guide
•
Unable to pair FOBO TIRE 2 In-Car unit
o
Make sure the battery is installed correctly and battery tab is removed.
o
Press side button on the in-car unit until hear a beep sound and LED
flashing at top center of the in-car unit.
o
Make sure your smartphone has Bluetooth 4.0 (Smart Ready)
capability.
NOTE: BLUETOOTH 2.0 OR 3.0 WILL NOT
WORK WITH THIS DEVICE.
o
Please check if the FOBO TIRE 2 has been paired before to another
FOBO account. You’ll need to “Release” the FOBO TIRE 2 set from
the FOBO account that it is paired to, before using on your account.
The FOBO TIRE 2 is designed to pair with one FOBO account only
for theft deterrent feature.
o
Try to do a hard reset on the phone.
o
Try by turning off/on your smartphone bluetooth.
•
Unable to get readings from FOBO TIRE 2 sensors after removing the
battery tab.
o
Try by removing the sensor battery – wait for 15 seconds – insert
back.
10
FOBO TIRE 2 Specifications
FOBO TIRE 2 sensor Specification:
•
Bluetooth: v5.0
•
Transmit Conducted Power: +5.0dBm (sensor)
•
Receiver Sensitivity: Conducted Sensitivity -97dBm @ 0.1%BER
•
Antenna Return Loss: Typical -9dB
•
Operating Frequency: 2.402~2.480 GHz
•
Battery Type: CR1632 (sensor). Operating life up to 1 year. (NOTE: The
battery operating life varies according to usage and climate temperature)
•
Operating Temperature: -40°C to +85°C (sensor), -20°C to +60°C
(sensor with common CR1632 batteries)
•
Weight: 7.6g (sensor –with battery)
•
Sensor Dimension H x D: 13.8mm x 20.2mm
•
Maximum Pressure: 800kPa (116psi)
