Need help? Go to www.weemote.com
15
SETTING UP YOUR TV CODE
ADDING THE ENTER OPTION
A small number of TV’s and SET-TOP boxes
require that the ENTER key be used when
changing channels.
The best way to tell whether you need to use
this option is to use your existing remote. Point
your existing remote at your TV or SET-TOP
box, and then change a few channels. Did you
need to use the ENTER button on that remote?
If yes, proceed with this setup, otherwise you do
not need to use this option.
STEP 1: Press the “TV” or “STB” button, de-
pending on which unit needs the enter option.
Hint: If you are using a SET-TOP box, then
press the STB button. After about 3 seconds,
the LED light will flash.
STEP 2: Press the “FAV” button once.
STEP 3: Press the NUMBER “1” button located
in the setup area next to the 100 and 10 buttons.
The LED light flashes twice and then goes out to
complete the sequence.
Note: If you go back and change the TV or
STB code, the ENTER option will be cleared.
Need help? Go to www.weemote.com
16
ADDING THE 3-DIGIT OPTION
The latest digital TV and SET-TOP boxes
support hundreds of channels. These units
typically require that when changing channels,
you enter three digits, regardless of the channel
number. For instance, channel 7 cannot be
entered as simply 7, but rather 007.
The best way to tell whether you need to use
this option is to use your existing remote. Point
your existing remote at your TV or SET-TOP
box, and then select channel 7. Did you need to
enter in 007 in order for the channel to change?
If so, then complete this section.
STEP 1: Press the “TV” or “STB” button, de-
pending on which device requires this option, for
about 3 seconds, until the LED light flashes.
STEP 2: Press the “FAV” button once.
STEP 3: Press the “100” button once. The LED
light flashes twice and then goes out to complete
the sequence.
NOTE: If you go back and change the TV or
STB code, the 3-DIGIT option will be cleared.
