Need help? Go to www.weemote.com
STEP
STEP
STEP
STEP
STEP
13
10
10
10
10
10
CONTINUED
CONTINUED
CONTINUED
CONTINUED
CONTINUED
8. Press the RED power button to see if the Set-
Top box turns off (*See Note Below). If it does
not, then go back to the beginning of Step 10,
using the next code number listed for your
manufacturer. If you have run through all the
possible codes and still cannot get the Set-Top
box to power off, then please refer to the
Reference Guide on how to search for your
code.
STEP
STEP
STEP
STEP
STEP
11
11
11
11
11
HOW DO YOU
HOW DO YOU
HOW DO YOU
HOW DO YOU
HOW DO YOU
USE YOUR
USE YOUR
USE YOUR
USE YOUR
USE YOUR
1. DO YOU USE THE ENTER KEY TO
CHANGE CHANNELS?
YES: Please go to Page 15 to set the Enter
Option, then continue to Step 12.
NO: Go on to question 2 below
2. WHEN YOU CHANGE CHANNELS, DO
YOU USE ALL THREE DIGITS REGARDLESS
OF THE CHANNEL NUMBER, I.E. CHANNEL 7
IS ENTERED ON YOUR REMOTE AS “007”?
YES: Please go to Page 15 to set the
3-Digit Option, then continue to Step 12.
NO: Go on to Step 12.
EXISTING SET-TOP
EXISTING SET-TOP
EXISTING SET-TOP
EXISTING SET-TOP
EXISTING SET-TOP
REMOTE CONTROL?
REMOTE CONTROL?
REMOTE CONTROL?
REMOTE CONTROL?
REMOTE CONTROL?
* Some codes may operate channel changing but not power. If you
leave your Set-Top normally on, then you can use one of these codes.
In this case, for each code tested, try to see if you can change channels
by pressing the channel up/down button (long blue button) By using one
of these codes, the weemote® will not power the Set-Top box on/off.
Need help? Go to www.weemote.com
STEP
STEP
STEP
STEP
STEP
14
12
12
12
12
12
TEST THE
TEST THE
TEST THE
TEST THE
TEST THE
SET-TOP CODE
SET-TOP CODE
SET-TOP CODE
SET-TOP CODE
SET-TOP CODE
IMPORTANT NOTE: If your Set-Top box is
set to use Channel 2,4,5 on your TV or your
TV is cabled using direct video connections
(RCA Jacks or S-Video), then please go to
Page 16 to set the Channels/Direct Video
option, then come back to this Step.
1. Make sure your TV and Set-Top box is
turned off.
2. Point the Weemote® at your Set-Top box
and press the Power (red) button. The Set-Top
box should go on as well as the TV. Now,
check the volume up/down button as well as the
channel up/down button. If all these functions
work, then you have the right code for your Set-
Top box.
If any of the functions above do not work, then
you will need to try another Set-Top code. Go
back and repeat Step 10.
STEP
STEP
STEP
STEP
STEP
13
13
13
13
13
FINISHING UP
FINISHING UP
FINISHING UP
FINISHING UP
FINISHING UP
1. Write the Set-Top code down on the battery
sticker located behind the battery door.
2. Go ahead and reattach the Setup area cover
and battery cover. DO NOT OVERTIGHTEN
THE SCREWS!!!
