![FoamPRO AccuMax 3040 Installation And Operation Manual Download Page 32](http://html1.mh-extra.com/html/foampro/accumax-3040/accumax-3040_installation-and-operation-manual_2313340032.webp)
32
Installation and Operation Manual
•
Perform Steps
1
through
3
to wet the foam pumps
to speed the priming operation.
1. Remove the pipe plug from the top of the gear
pump.
2. Fill the pump with concentrate.
3. Replace the pipe plug.
CAUTION: When pouring foam concentrate
directly into the foam pump, the inlet strainer is
bypassed. Make sure contaminates are not poured
into the pump chamber. Premature pump wear or
damage may result if contaminants are allowed to
enter the pump chamber.
Proceed to Calibration, Section 11, as the System
must be recalibrated.