FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物科技开发有限公司
19
/
43
3.2.3.2 IP Out Address
If users enable the IP output function, then users can set the device IP output address in
this interface. After users press the ENTER key, the operating interface will display the
following page:
3.2.3.3 IP Out Port
In this menu, users can set the encoder IP output port number by press the ENTER key to
enter the main editing interface.
3.2.3.4 Trans Stream ID
Users can set the device TS ID in this interface after pressing the ENTER key to enter the
main editing page.
3.2.3.5 Output Stream
Users can modify the bit rate of output stream in this interface after pressing the ENTER
key to enter the main editing page.
3.2.3.6 ASI Output
3.5 Output Stream
040.000 Mbps
