FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物科技开发有限公司
20
/
43
This is the new function of this encoder, user can decide whether to open the IP
output function by press the ENTER key in this menu, and the operating interface
will show the following page:
3.2.3.2 IP Out Address
If users enable the IP output function, then users can set the device IP output
address in this interface. After users press the ENTER key, the operating interface
will display the following page:
3.2.3.3 IP Out Port
In this menu, users can set the encoder IP output port number by press the ENTER
key to enter the main editing interface.
3.2.3.4 Trans Stream ID
Users can set the device TS ID in this interface after pressing the ENTER key to
enter the main editing page.
3.2.3.5 Output Stream
Users can modify the bit rate of output stream in this interface after pressing the
ENTER key to enter the main editing page.
3.5 Output Stream
040.000 Mbps
