FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物科技开发有限公司
11
/
43
User can firstly find the HDMI or SDI interface on the device according to the
connector mark described on the rear panel illustration, and then connect the HDMI
or SDI cable (in the accessories). One end is connected to the head-end equipment
while the other end to the encoder’s HDMI or SDI input port. The encoder’s HDMI or
SDI input port and its connection are illustrated as follows:
2.4.6 ASI output interface connection
User can firstly find the ASI output interface on the device according to the
connector mark described on the rear panel illustration, and then connect the ASI
cable (in the accessories). One end is connected to the encoder’s ASI out
connector (ASI out1, ASI out2) while the other end to the TS stream multiplexer or
modulator’s ASI input port. The encoder’s ASI output interface and its connection
are illustrated as follow:
2.4.7 IP Output Interface connection
Users can firstly find the DATA interface on the device according to the connector
mark described on the rear panel illustration, and then connect the network (CAT5).
One end of the network cable is connected to the encoder’s DATA output connector,
while the other end to the TS stream multiplexer IP input port or other device which
can input IP signal. The encoder’s DATA connection is illustrated as follows:
