www.fmuser.org
www.fmuser.org
1.4
Set CCU parameters
l
Turn off RF Switch: RF Switch = OFF
l
Power Percentage: 0%--100%
l
Period Control
If period control is needed, set three periods first and then enable Period
Control (Period Control =Enabled).
If period control is not needed, just disable Period Control (Period Control =
Disabled).
1.5
Turn on the Power Amplifier
l
Turn on the Power Supply of the Amplifier PA
l
Turn on the RF Switch: RF Switch = ON
1.6
Adjust RF power
l
For automatic control, just set power in CCU.
l
For manual control, increase exciter’s power slowly; meanwhile watch RF
power and other information displayed on CCU’s LCD.
