PREMA
xx
Electrical Pump
Operating Instructions
According to § 19g of WHG, facilities for filling must be designed, installed, erected,
maintained and operated in such a way that a contamination of waters or any other
permanent change of their characteristics is not possible.
According to § 19l of WHG, the operator of such a facility is obliged to monitor his plant at all
times at the place of installation, in order to check that the above mentioned requirements
are met.
2. General Safety Notes
2.1
Notes concerning work safety
The
PREMA
xx
electrical pump is designed and built according to the appropriate health and
safety requirements of the relevant EC guidelines.
This product can nevertheless produce hazards if it is not used according to its purpose or
without the necessary care (=> see chapter 1.1).
Please read therefore these operating instructions before operating the
PREMA
xx
electrical
pump and pass these on to any other users of the pump.
In any case, the local safety and accident prevention provisions apply for the operation of the
PREMA
xx
electrical pump.
Please pay attention to the safety notes in these operating instructions.
2.2
Explanation of safety notes used
The safety notes used in these operating instructions distinguish between various levels of
hazard. Various levels of hazard are marked in the instructions using the following signal
words and icons:
Icon
Signal word Consequences of not observing the safety provisions
Danger
Death or most severe injuries
Warning
Possible death or severe injuries
Caution
Possible slight or lesser injuries, or material damage
Table 2-1: Classification of safety notes according to type and severity of hazard
Furthermore, another note is used giving general tips for the handling of the product.
Icon Signal
word
Meaning
Note
Background knowledge or tips for the correct handling of the
product
Table 2-2: General note
4
