www.fmiproducts.com
125566-01C
24
Figure 46 - Installing Log # 10
Figure 47 - Installing Log # 11
INSTALLATION
Continued
10
11
Figure 48 - Final Assembly
Square
Peg
Round
Peg
Figure 49 - Installing Bottom Ember Log
Figure 50 - Installing Rear Log
LTF(18,24,30)-RS LOG PLACEMENT
It is very important to install the logs exactly
as instructed. Do not modify logs. Only use
logs supplied with heater or as identified for
use with the heater as shown.
1. Place bottom ember log on base as-
sembly as shown in Figure 49. The log
should fit over the left side of the burner
and rest in the middle of the U-burner.
2. Place the rear log on the base assembly
as shown in Figure 50. The rear log has
grooves in the bottom which will allow
the log to sit on the burner and behind
the bottom ember log
Rear Log
Base Assembly
Burner
Tube
Bottom Ember Log
Burner Tube
