Owner & Safety Manual
D. OLVG-320.000.V0
En-3
OUTLAND LIVING VERTICAL GARDEN OWNER & SAFETY MANUAL
SECTION 1:
ASSEMBLY
STEP 1
BOTTOM FRAME:
Place (x1) LEFT BOTTOM FRAME, (x1) RIGHT
BOTTOM FRAME, (x1) STRENGTH CROSS BAR
(wrapped in ORANGE paper) and (x2) BIN HANGER
CROSS BARS on a flat work surface. Insert the
STRENGTH CROSS BAR into the bottom slot of the
LEFT BOTTOM FRAME. Then insert the two BIN
HANGER CROSS BARS into the upper two slots of the
LEFT BOTTOM FRAME. Align the slots of the RIGHT
BOTTOM FRAME with the cross bars and insert
.
(x1) Strength Cross Bar
(x1) Strength Cross Bar
(x2) Bin Hanger Cross Bar
(x3) Bin Hanger Cross Bar
(x2) M5 x 16mm
Screw
(x2) M5 x 16mm Screw
(x1) Left Bottom Frame
(x1) Right Bottom Frame
(x1) Right Top Frame
(x1) Left Top Frame
(x1) Left Rear
Leg Frame
(x1) Right Rear
Leg Frame
STEP 2
TOP FRAME:
Place (x1) LEFT TOP FRAME, (x1) RIGHT TOP FRAME
and (x3) BIN HANGER CROSS BARS on a flat work
surface. Insert the three BIN HANGER CROSS BARS
into the three slots of the LEFT TOP FRAME. Align the
slots of the RIGHT TOP FRAME with the cross bars
and insert. Screw in (x2) M5 x 16mm SCREWS into the
cross bar on the TOP slot
.
STEP 3
REAR LEG FRAME:
Place (x1) RIGHT REAR LEG FRAME, (x1) LEFT
REAR LEG FRAME and (x1) STRENGTH CROSS BAR
(wrapped in ORANGE paper) on a flat work surface.
Insert the STRENGTH CROSS BAR into the slot on the
LEFT REAR LEG FRAME. Align the slot of the RIGHT
REAR LEG FRAME with the STRENGTH CROSS BAR
and insert. Screw in (x2) M5 x 16mm SCREWS into the
STRENGTH CROSS BAR
.
