www.fmiproducts.com
125568-01A
18
INSTALLATION
Continued
Figure 24 - Installing Right Front Log
Figure 24A - Installing Right Front Log,
Top View
CAUTION: After installa-
tion and periodically thereafter,
check to ensure that no flame
comes in contact with any log.
With heater set to Hi, check to
see if flames contact any log. If
so, reposition logs according to
log installation instructions in
this manual. Flames contacting
logs will create soot.
LMF (42 AND 48)-SC SERIES LOG PLACEMENT
It is very important to install these logs exactly
as instructed. Do not modify logs. Only use
logs supplied with heater or as identified for
use with the heater as shown in Figure 23.
Note: Each log includes an identifying number
cast in the log. Look at each log when plac-
ing them on the burner system to be certain
it is correct.
Find the right front log (LMF42-SC: D-019
1.
or LMF48-SC: D027). See Figures 24,
24A, 24B, and 24C for reference. The log
Figure 23 - MF Series Burner System- Log Compatibility Chart
INSTALLING LOGS, EMBERS AND
LAvA ROCK
WARNING: Failure to position the
parts in accordance with these diagrams
or failure to use only parts specifically
approved with this heater may result in
property damage or personal injury.
Burner System Model
MF42INR,MF42IPR,
MF42INV, MF42IPV
MF48INR, MF48IPR,
MF48INV, MF48IPV
Refractory Concrete Logs
For Use With This Burner
System
LMF42-SC
LMF48-SC
MF SERIES BURNER SYSTEM-LOG COMPATIBILITY
CHART
has a rectangular shape on the bottom
that fits between the black metal base, the
square grate, and the round tube burner.
Place the log on the base assembly as
shown in Figures.
Burner
Tube
Grate Finger
Base
assembly
Right Front Log
(D-019 or D027)
Round
Tube
Burner
Grate
Finger
