www.desatech.com
115425-01E
4
3.. Never.install.log.set
•.in.a.recreational.vehicle
• where curtains, furniture, clothing, or
other flammable objects are less than
42" from the front, top, or sides of the
log.set
• in high traffic areas
• in windy or drafty areas
•.in.bedroom.or.bathroom
4.. Before. installing. in. a. solid. fuel. burning.
fireplace, chimney flue and firebox must
be cleaned of soot, creosote, ashes and
loose paint by a qualified chimney cleaner.
Creosote will ignite if highly heated. Inspect
chimney flue for damage. If damaged,
repair flue before operating heater.
5. To reduce creation of soot, follow in
-
structions.in.
Cleaning and Maintenance
,
page.10.
6.. Installation. and. provisions. for. combus-
tion. and. ventilation. air. must. conform.
with the
National Fuel Gas Code, ANSI
Z233.1/NFPA 54, Air for Combustion and
Ventilation
.
SAFETy
Continued
PRODUCT IDENTIFICATION
Figure 1 - Product Identification (Ramp Pan Burner)
Grate
Burner.Pan
Burner.Inlet.
(Under.Pan)
7.. Do.not.run.log.set
• where flammable liquids or vapors are
used.or.stored
•.under.dusty.conditions
8. Do not burn solid fuel in fireplace after
installing. log. set.. Do. not. use. this. log.
set.to.cook.food.or.burn.paper.or.other.
objects.
9. To help prevent breakage, new logs must
be.broken.in.(see.
Curing Logs
.page.10).
10..Turn.log.set.off.and.let.cool.before.servic-
ing, installing, or repairing. Only a qualified
service person should install, service, or
repair.log.set..
11..Provide.adequate.clearances.around.air.
openings.
Hearth Kit Model
.________________
Serial.Number.__________________
Log.Set.Model.__________________
