FM4040 Installation Instructions
CI 202 Iss 1 26-11-02 Page 16 of 20
APPENDIX A USER FACILITIES
CHANGING YOUR PIN NUMBER.
You can change your 4 digit PIN number at any time by the following sequence.
1.
Enter your 4 digit pin number.
2.
Press key 7.
The full set indicator on the panel will flash.
3.
Key in your new 4 digit pin number twice.
The flashing indicators will now stop.
If you make a mistake when keying in a number, press the Full Set key to exit and
start again. The number will not change until you have keyed in the same 4 digit
PIN number twice.
If no key is pressed for 20 seconds the program mode is aborted and the panel
will revert to the original pin number.
CHIME OPTION
If you require a detector to trigger a chime. i.e. To give an audible indication
when someone enters via the front door, you may set the sensor on that door to
operate a chime.
To set or remove chime:
1.
Key in your pin number
2.
Press the 8 key.
The Full set indicator will flash.
3.
Press the number keys
to select which zones will chime.
The zones with their indicators illuminated will chime.
The zones not illuminated will not chime.
4.
Press the Full Set key
when you have set the desired chime zone
