elevator and then rudder servo. Glue the carbon tubing on the fuse for a guide and
strength.
Cut out servo holes 10 inches from end of fuse as in photos.
Align and glue the rear elevator assembly to the fuselage so that it is in line to the
axis of the fuselage. After attaching the elevator attach the vertical stabilizer
(making sure of proper alignment & centered in the Fuselage). Insuring it is straight
and centered with the fuselage.
INSTALL WING
Pull apart the bottom of the hull at the notch for the landing gear and slip the wing
into the hole of the fuselage. Centering the wing and then gluing to the fuselage so
that the axis of wing and fuselage axis were perpendicular.
LANDING GEAR CHASSIS
