BUILDING INSTRUCTIONS
Thank you for purchasing the ACROFLYER 90, before starting work read the entire
assembly guide for all construction details. It is necessary to check your kit to ensure the
supplied parts are flat and smooth where appropriate, use fine sandpaper to each part to
correctly mate them properly.
In assembling the model, make sure the control rods align accurately and operate smoothly
and forks, levers, and control surfaces are even and level for proper alignment and
symmetry of parts kits. The accuracy of your work will affect the flying characteristics.
ACROFLYER 90 is an aerobatic plane designed for aerobatic flying. It is made of almost
indestructible EPP material. They have been precision cut on CNC machines. With its
durable design you will be able to fly in the wind with confidence.
The ACROFLYER 90 is capable of many acrobatic flight elements - loops, inverted flight,
rolls, spins, hanging in a hover on prop, inverted loop.
Thanks to its thoughtful design and materials used this model can withstand sharp
maneuvers, rough handling and minor accidents with no serious damage, any repairs are
very simple. EPP makes the model very durable.
To complete the model you will need:
4 Channel RC kit, 4 servos, motor, 30Amp ESC , 10x5 prop , prop adapter, 1800 mAh 3
cell Lipo, (CA glue, and CA activator Hot glue or FoanTac)
Recommended Equipment:
- Motor- Emax 2215/09 or 2218/09 with a 10x5 prop
- ESC (electrionc Speed Control)- 30Amp ESC-
-Battery-Li-po 1800 mAh, 3 Cell
-4 Servos ES08A or ES08MA for extra durability
