FLYSURFER CONNECT2, User Manual

Page: 9 / 20

EN
GL
ISH
9
UN
W
IN
DI
NG
A
ND
S
OR
TI
NG
O
F
Th
E
FL
yI
NG
L
IN
ES
07 CONNECTING ThE FRONT- AND
BACK-LINES WITh ThE KITE
07.01 Connecting the control bar to a Foilkite
Start at the capony and hold the front lines up for an optical
ccheck of the bridle. Check the bridle levels from A-Z. Sort the
mixer and connect your grey front lines to the attachment points
on the kite below the mixer with a larkshead on the ring provi-
ded.The same method is used on the color-coded backlines and
their associated attachment points.
Attach a 4-line control bar on a foil kite
Attach a 5-line control bar on a foil kite
Press the release pin on the SIMPLE Quick Release and slide
the release handle down to lock the latch.
06 UNWINDING AND SORTING
OF ThE FLyING LINES
Lay the lines loosely on the ground when unwinding.
Slide the lines through your fingers and check for knots or
damaged areas.
Lay the front and steering lines fanned to the ground.
Pay attention to the color coding when connecting the control
bar with your FLYSURFER kite.
Zusammenbau des QR Zusammenbau des QR
Line Attachment
Back Back Back Front Back Front Front Front 5th Line
Line Attachment
Back Back Back Front Back Front Front Front 5th Line
Line Attachment
Line Attachment