EN
GL
ISH
14
Sh
OR
TE
N y
OU
R
FL
yI
NG
L
IN
ES
Remove the 7 m B-Safe Line attached to the 14 m B-Safe
Line.
Wind all extension lines on the cardboard wrapper or stow
them in a bag.
Attach the B-Safe Line as descriped in the chapter „Instal-
ment of the B-Safe Top Lines on the PEAK5“.
11.02 Shorten your flying lines with 4-line Front
Line Safety System
Remove all pigtails from all four flying lines (Back- and front
lines).
Store the pigtails in a bag or put it aside.
Thread the 7 m extension line through the loop of the flying
line (Back- or front line) and remove it. Repeat this process on
the other three flying lines and put them aside.
11 ShORTEN yOUR FLyING LINES
11.01 Shorten your flying lines with 5-lines B-Safe
System
Disconnect both B-Safe Top Lines (B-Safe Main) from the
PEAK.
Open the connection between the B-Safe Top Lines (PEAK)
and the B-Safe Line (5th line).
Remove all pigtails from all four flying lines (Back- and front
lines). There is no pigtail attached to the end of the B-Safe Line
(5th line).
Store the pigtails in a bag or put it aside.
Remove the 7 m extension from the flying line (Back- or front
line). Repeat this process on the other three flying lines.
Attach each pigtail to the shortened flying lines (14 m). Re-
peat this process on the other three flying lines.
Summary of Contents for CONNECT2
Page 1: ...USER MANUAL CONNECT2 EN...
