Website
36
7.13 Channels Offset
This function allows you to adjust the overall offset of each channel data. The offset caused by the model can be
corrected using this function. If the offset is set too much, the control amount of one end of the channel is reduced.
If the model deviation is large, please try to adjust the model first.
7.12 DR Setup
Set the function, switch of DR and effective condition to enable the DR. The transmitter supports 10 groups DR.
Function Settings:
1. Enter DR setting menu.
2. Select a function item you want to set, tap to return.
3. Tap the box next to function, set an appropriate switch
to enable or disable DR function and switch status. Then
tap to return
4. Tap the box corresponding to the mode to enter the
setting menu, then select the appropriate mode, tap to
return.
Note: This function is available for version 1.0.28 or above.
Function Settings:
1. Click the channel you want to set.
2. Click + / - to change to a value, then click to return.
Function Settings:
1. Tap the function you want to set.
2. Select
EXP2, LINE
.
3. Tap the function item you want to set.
4. Click + / - to change to an appropriate value. Tap to
return.
