05
16.Glue the upper vertical fuselage onto the horizontal fuselage with some foam
friendly C/A, use the T-Pins to make them perpendicular, no distortion.
17.Fix the vertical stabilizer onto the fuselage with some 3M magic tape.
18.Fix the control horns into the pre-cut slots on the aileron with some friendly C/A,
and then fix coupling heads on the aileron servo arms and control horns, at last
install the aileron push-pull rods.
19.Glue the fuselage reinforcing strips on the fuselage. ( You can also choose
the carbon stay bars to fix the fuselage)
20.Insert the control horns into the pre-cut holes on the vertical stabilizer
，
and then fix the coupling heads on the rudder servo arm and control horn, at last
install the rudder push-pull rod.
