03
7.Fix the lower vertical fuselage onto the horizontal fuselage with some foam
friendly C/A, Please use the T-Pins to make sure they are perpendicular before
gluing.
8.As shown, fix the base of the fuselage stay bar vertically on the fuselage.
9.Glue the wing reinforcing strips on the wing, then place the wing and fuselage,
press down firmly, then put one side of the wing stay bar through the base, the
other side is fixed on the top of the wing. The stay bar should remain straight, not
buckled.
10.Fix the other stay bars on the fuselage as shown in the picture.
11.Install the landing gear onto the pre-cut holes of the fuselage and wing.
