Problem
Possible Cause
Remedy
Hedge is not cleanly cut
Blade blunt or damaged.
v
Have blade replaced by
FLYMO-Service.
Hedge Trimmer cannot
be switched off.
Start button is stuck.
v
Remove battery and loosen
start button.
Charging control lamp
9
on
the charger flashes for more
than 1 hour
A fault has occurred.
v
Unplug and reinsert
charging cable.
The fault will be reset.
The battery can no longer
be charged
Battery is defective.
v
Replace the battery.
Only the original FLYMO Replacement Battery NiMH 18 V may
be used. This can be obtained directly from FLYMO Service.
For any other malfunctions please contact the FLYMO service department.
Repairs must only be carried out by FLYMO service departments or specialist
dealers authorised by FLYMO.
9. Technical Data
SabreCut XT Cordless 18 V
Strokes
2100 / min.
Length of cutter blade
42 cm
Tooth gap of cutter blade
16 mm
Range of extension of
telescopic tube
0 – 50 cm
Weight including battery
3.5 kg
Workplace related
sound pressure level L
PA
1)
Uncertainty K
PA
70 dB(A)
3 dB(A)
Noise emission value L
WA
2)
Uncertainty K
WA
measured 86 dB(A) / guaranteed 89 dB(A)
3 dB(A)
Hand / arm vibration a
vhw
1)
Uncertainty K
a
< 2.5 m/s
2
1.5 m/s
2
Battery
NiMH (18 V)
Battery capacity
1.6 Ah
Battery charging time
approx. 6 hrs
Idling time
approx. 65 mins. (with full battery)
Battery charger
Mains voltage
230 V / 50 – 60 Hz
Max. output current
300 mA
Output voltage
24 V (DC)
Measuring process complying with
1)
EN 60745-2-15
2)
RL2000/14/EC. The stated vibration emission value has been measured
according to a standardised test procedure and can be used for comparison of one electric power tool with another. It can also be
used for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric power tool.
9
5871192-01_9672988-01.indd 9
12.06.14 10:08
