background image

10. Warranty

If any part is found to be defective due to faulty manufacture 

 within the guarantee period, Husqvarna UK Ltd., through its 

Authorised Service Repairers will effect the repair or replacement 

to the customer free of charge providing:
(a)  The fault is reported directly to the Authorised Repairer.
(b)  Proof of purchase is provided.
(c)    The fault is not caused by misuse, neglect or faulty adjustment 

by the user.

(d)  The failure has not occurred through fair wear and tear.
(e)    The machine has not been serviced or repaired,  

taken apart or tampered with by any person not authorised  

by Husqvarna UK Ltd.

(f)   The machine has not been used for hire.
(g)   The machine is owned by the original purchaser.
(h)   The machine has not been used commercially.
*    This guarantee is additional to, and in no way diminishes  

the customers statutory rights. Failures due to the following 

are not covered, therefore it is important that you read the 

instructions contained in this Operator’s Manual and under-

stand how to operate and maintain your machine:

Failures not covered  

by guarantee:

*  Replacing blade and eccentric drive.
*   Failures as a result of not reporting an initial fault.
*   Failures as a result of sudden impact.
*    Failures as a result of not using the product in accordance 

with the instructions and recommendations contained in this 

Operator’s Manual.

*   Machines used for hire are not covered by this guarantee.
*    The following items listed are considered as wearing parts  

and their life is dependent on regular maintenance and are, 

therefore not normally subject to a valid warranty claim:

 

Blade and eccentric drive

*   Caution!
Husqvarna UK Ltd. does not accept liability under the warranty  

for defects caused in whole or part, directly or indirectly by the 

 fitting of replacement parts or additional parts that are not either 

manufactured or approved by Husqvarna UK Ltd., or by the 

machine having been modified in any way.

10

5871192-01_9672988-01.indd   10

12.06.14   10:08

Summary of Contents for sabrecut xt













Reviews: