background image

Guarantee & Guarantee Policy

Guarantee & Guarantee Policy

If any part is found to be defective due to faulty
manufacture within one year of original
purchase, Electrolux Outdoor Products, through
its Authorised Service Repairers will effect the
repair or replacement to the customer free of
charge providing:

(a) The fault is reported directly to the

Authorised Repairer.

(b) Proof of purchase is provided.

(c)  The fault is not caused by misuse, neglect

or faulty adjustment by the user.

(d)  The failure has not occurred through fair

wear and tear.

(e)  The machine has not been serviced or

repaired, taken apart or tampered with by
any person not authorised by Electrolux
Outdoor Products.

(f)  The machine has not been used for hire.

(g)  The machine is owned by the original

purchaser.

(h)  The machine has not been used outside of

the country for which it was specified.

(i)

The machine has not been used
commercially.

*

This guarantee is additional to, and in no
way diminishes the customers statutory
rights.

Failures due to the following are not covered,
therefore it is important that you read the
instructions contained in this Operator's Manual
and understand how to operate and maintain
your machine:

Failures not covered by guarantee

*

Replacing Nylon Line.

*

Failures as a result of not reporting an initial
fault.

*

Failures as a result of sudden impact.

*

Failures as a result of not using the product
in accordance with the instructions and
recommendations contained in this
Operator's Manual.

*

Machines used for hire are not covered by
this guarantee.

*

The following items listed are considered as
wearing parts and their life is dependent on
regular maintenance and are, therefore not
normally subject to a valid warranty claim:
Nylon Line, Electric Mains cable.

*

Caution!
Electrolux Outdoor Products does not
accept liability under the warranty for
defects caused in whole or part, directly or
indirectly by the fitting of replacement parts
or additional parts that are not either
manufactured or approved by Electrolux
Outdoor Products, or by the machine having
been modified in any way

11

Summary of Contents for Mini Trim Auto
















Reviews: