Table 13.2– continued from previous page
Field ID
Description
Dist. Units
Distance units can be in Km, or Miles.
Speed Units
Speed Units can be in Km/h, Miles/h, or Knots.
Temperature
Temperature units can be Celsius or Farenheit.
Coords.
Coordinates format. These can be either:
•
DD
°
MM’SS?
•
DD
°
MM.mmm’
•
DD.dddd
•
UTM
13.10
Device Settings
This menu option allows the user to reset all parameters to the default factory values. This will not
change the layout to the factory default layout. Care should be taken because all changes made by
the user are lost. In order to reset all settings use UP, or DOWN key to change the
Factory Settings
parameter to
Yes
, and then confirm the action with the ENTER key.
Additionally this menu also allows to make an hardware reset to the instrument. The result is
the same as the one presented in Section
1.5
. In order to reset the instrument use UP, or DOWN
key to change the
Reset Now
parameter to
Yes
, and then confirm the action with the ENTER key.
13.11
RF Probes
The
RF Probes
menu option allows the user to pair up any of the Flymaster wireless devices
including the M1 and Heart-G to the NAV . Pairing is performed automatically. The NAV will look
to see what wireless devices are around and it will shows these on the screen (Figure
13.13
).
Figure 13.13: RF probes
In the example shown in Figure
13.13
, two M1 devices are visible. These are distinguished on
the screen by showing their serial number. (The serial number for the device can be found on the
back of the wireless device). By selecting one of the M1 devices and selecting ENTER, the option
to pair that device becomes available. Once paired the NAV will aways pair with that same wireless
device.
55
Summary of Contents for NAV
Page 1: ...User manual Document version 3 4...
Page 25: ...24...
Page 37: ...Figure 8 2 Critical Airspace Data 36...
Page 61: ...Figure 14 1 Firmware Update 60...
