Chapter 5
Waypoints and Task
Figure 5.1: Waypoints and TaskScreen
The Waypoints/Taskpage allows the user to manage waypoints, and define a route/task. As shown
in Figure
5.1
, the page is divided into 3 areas, namely the waypoint list (WL); Task list (TK) and
selected waypoint details/options list (DO). The DO area can change according to which submenu
you are in. Specifically, it can show the selected waypoint data, or a list with possible actions for
the waypoints.
Entering the page activates the WL area. At the top of the page next to the title Waypoints,
is the total number of Waypoints stored in the NAV instrument.
1
The first waypoint on the list
appears highlighted, and the corresponding data of the selected waypoint is shown in the DO area.
As the cursor is moved to a different waypoint so the data changes matching the newly selected
waypoint. If the waypoints list is empty a list of available actions is shown in the DO area. Since
no waypoint exists only the
Insert new Waypoint
action is available.
Pushing the ENTER key when a waypoint is selected activates the waypoint actions menu
(WAM). A list with the available actions is shown in the DO area.
1
The NAV can store up to 442 waypoints.
25
Summary of Contents for NAV
Page 1: ...User manual Document version 3 4...
Page 25: ...24...
Page 37: ...Figure 8 2 Critical Airspace Data 36...
Page 61: ...Figure 14 1 Firmware Update 60...