10
EN
Product Maintenance
Lubricating
After the running belt has been used for a period of time, it must be lubricated with 100% silicone
treadmill lubricant oil.
1.Recommendations:
--Use less than 3 hours per week, lubricate once every 5 months.
--Use 4-7 hours a week, lubricate once every 2 months
--Use more than 7 hours a week, lubricate once a month
Don'tuse an excessive amount of lubricating agent.It is not that the more lubricant, the better
effect. Reasonable lubrication is an important factor to increase the service life of the treadmill.
2. Lubrication method
The way to check whether you need to add lubricant is to grab the running belt and touch the
center of the back of the running belt with your hands as much as possible. If there is silicone oil (a
litte damp feeling)inside the running bet, it means no need to add lubricant. If the running board
is dry and no silicone is felt in the running belt, you need to add lubricant.
(1) The steps of applying lubricant to the running board;(As shown as picture)
(2) Stop the running belt and fold the machine;
(3) Lift the running belt on the back of the mainframe, extend the oil can into the running belt
movement position as much as possible. Spray silicone oil on the inside of the treadmill, and
apply silicone oil on both sides of the running belt, then start the treadmill with a speed 0.6 mph
to evenly spread the lubricant. Liahtly step on the running belt from left to right, the lubricant can
be completely absorbed by the running belt after a few minutes.
Running belt
Running board
Running board
Lubrication oil