Web Configuration FIP16 User Manual
TR069
!
Parameters name
Description
Provision Enable
Whether provisioning is enabled
Resync On Reset
Whether DIV378 is restarted after restarting
Resync Random Delay(sec)
Set the maximum delay for requesting a synchronization file,
which defaults to 40
Resync Periodic(sec)
Set the timing resynchronization, the default is 3600 seconds
Resync Error Retry Delay(sec)
If the last resynchronization is a failure, after the "Resync Error
Retry Delay" time, ATA will retry the resynchronization,
defaulting to 3600 seconds
Forced Resync Delay(sec)
If the time to re-sync, but ATA is busy, in this case, ATA will wait
for some time, the longest is the "forced resynchronization
delay", the default is 14400s, after time, ATA will be forced to
re-sync
Resync After Upgrade
After re-synchronization, whether to enable the firmware
update function, the default is enable
Resync From SIP
Whether to enable resynchronization from SIP
Option 66
It is only used in the company within the provisions of the
model. When using TFTP with option 66 to implement the
configuration, the user must enter the correct profile name on
the ATA web page. When option 66 is disabled, this parameter
does not work
Option 67
Whether to enable Option 67
Config File Name
Configuration file name
User Agent
Set the user agent
Profile Rule
The URL of the configuration file
Upgrade Enable
Note that the specified file path is relative to the root directory
of the TFTP server
Upgrade Error Retry Delay(sec) Turn on or off
Upgrade Rule
Set the upgrade error retry delay interval, the default 3600
seconds
Summary of Contents for FIP16
Page 1: ... 1 ...
