4. Lever hardness adjustment
It's possible to adjust the lever movement hardness in this way:
- Put the lever in the 4000 RPM position
- Remove with a screwdriver the plug on the left side
- Unloose the nut using the socket wrench furnished with the PR1-PL
- Turn lightly the screw:
clockwise to decrease the lever hardness
counterclockwise to increase the lever hardness
- Tighten again the nut to lock the mechanism at the
desired lever hardness
- Put the plug on the panel
5. Technical specifications
- Dimensions: 115 x 41 x 58 mm
- Weight: 180 g
- Operational temperature range: -20 ~ +70°C
- Humidity: 90% max
6. Warranty
This product is warranted to be free from defects for a period of 12 months from the user invoice date.
The warranty only covers manufacturer defects and shall not apply to a product that has been improperly installed,
misused or incorrect maintenance, repaired or altered by non-qualified persons.
MICROEL s.r.l.
Via Mortara 192-194
27038 Robbio (PV) - ITALY
Tel +39-0384-670602 - Fax +39-0384-671830
WARNING: All photos, data, drawings, instruments layouts, technical solutions and data representation you find in this document or watching at Flybox® instruments working and/or you can access by means of
any other media, including web sites, are sole property of MICROEL SRL, cannot be copied or imitate without a written permission of MICROEL SRL itself and are protected by law, even by means of extended
international copyright and/or specific patents deposited. Any infringement of this statement and of MICROEL SRL intellectual property will be prosecuted.
©2016 Microel s.r.l. – all rights reserved.
