Flyability Elios 3 User Manual Download Page 82

Page: 82 / 94

ELIOS 3 User Manual

S01

Drone didn't shut down

correctly

Check for a CRD ﬁle on the Avionics SD card and contact Flyability

Support.

S02

Communication protocol

version mismatch

Not the same starnet version on Cockpit and Drone (i.e., starnet

mismatch). Please update both Cockpit and the drone.

S03

Transmission FW version

mismatch

Transmission FW version mismatch between ground and air unit.

S04

Cockpit version not compatible

with the drone

Please make sure that both systems are up to date.

S05

Avionics stopped logging

The avionics stopped logging.

S06

OBC is initializing

The OBC logging system is initializing. Please wait until it does so.

S07

OBC did not initialize properly

The OBC logging system did not initialize properly and thus

timed out. Please wait until it restarts and properly initiates.

S08

OBC logging system failure

OBC logging failure—please restart the drone.

S09

Drone cannot be armed in
current state

The drone cannot be armed in the current state. Please restart it.

Contact Flyability support if a problem persists.

S10

Unable to communicate with the
ethernet switch

Internal communication error.

S11

Switch status doesn't show a
connected port on OBC side

Internal communication error.

S12

Switch status doesn't show a
connected port on LiDAR side

Internal communication error.

S13

Altitude estimation error

Altitude estimation error, drone cannot be armed in current

state—please restart the drone.

ELIOS 3 User Guide

Page 82 of 94

Summary of Contents for Elios 3































































































Search results

Summary of Contents for Elios 3

Reviews:

Related manuals for Elios 3

Brands by name

Popular brands

Flyability Elios 3, User Manual

Search results

Summary of Contents for Elios 3

Reviews:

Related manuals for Elios 3

Brands by name

Popular brands