Flyability Elios 3 User Manual Download Page 25

Page: 25 / 94

ELIOS 3 User Manual

OUNT THE TABLET

To mount the tablet onto the controller, follow these steps:

Put the antennas and the tablet holder in a vertical position.

2. Adapt the clamp height to the correct height for the tablet to ﬁt in and then lock the tablet in place

with the locking knob situated on top of the tablet holder.

Connect your tablet to the remote controller via the USB-C cable.

Figure 3.2: Assembly of the GCS

OWER ON THE CONTROLLER

To turn the controller on/off:

–

press the power button once; it will display the battery level on the LEDs

–

Press it again and hold

The controller will turn on; the same sequence can be used to turn it off again.

OWER ON THE TABLET

To turn on/off the tablet:

–

Press and hold down its power button.

UN THE COCKPIT APP

–

The cockpit app is used to view the live video and telemetry data from the drone. The cockpit app
comes pre-installed on the tablet shipped with the ELIOS 3 pack.

ELIOS 3 User Guide

Page 25 of 94

Summary of Contents for Elios 3































































































Search results

Summary of Contents for Elios 3

Reviews:

Related manuals for Elios 3

Brands by name

Popular brands

Flyability Elios 3, User Manual

Search results

Summary of Contents for Elios 3

Reviews:

Related manuals for Elios 3

Brands by name

Popular brands