H1 user manual
Adjust software
Install new helicopter：
Please watch the “tutorial video”，run parameter adjustment assistant，Complete the parameter
setting according to the software guidelines.The specific process is as follows:
1.Ensure the power supply of flight control system is normal.
2.Connect H1 to the computer, set the transmitter correctly, bind and turn it on, and the
mode is in 3D.
3.Run the parameter adjustment software.Choose the right COM port（not COM1），click
connect computer，until the Interface become Light up.
4.Click "install new machine" in the main interface.
5. Select the corresponding model.
6. Confirm the model configuration.
7.click“yes,this is my helicopter”,the preset parameter information is written，the import is
successful.If the
configuration is different
, please click "
configuration is different
" and go to
step 11 to select general model installation.
