background image

6

Digital proportional radio control system

2. Introduction 

The FS-i4X transmitter and FS-A6 receiver constitute a 4-channel 2.4GHz AFHDS 2A digital proportional 
computerized R/C system. It is compatible with fixed-wing and helicopters.

2.1 System Features

The AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation) developed and 
patented by FLYSKY is specially developed for all radio control models. Offering superior protection 
against interference while maintaining lower power consumption and high reliable receiver sensitivity, 
FLYSKY's AFHDS technology is considered to be one of the leaders in the RC market today.

Bidirectional Communication

Capable of sending and receiving data, each transmitter is capable of receiving data 

from temperature, altitude and many other types of sensors, servo calibration and i-BUS 

Support.

Multi-channel Hopping Frequency

This systems bandwidth ranges from 2.4055GHz to 2.475GHz. This band is divided in 

140 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean 

versions) in order to reduce interference from other transmitters. 

Omni-directional Gain Antenna

The high efficiency Omni-directional high gain antenna cuts down on interference, while 

using less power and maintaining a strong reliable connection.

Unique ID Recognition System

Each transmitter and receiver has it's own unique ID. Once the transmitter and receiver 

have been paired, they will only communicate with each other, preventing other systems 

accidentally connecting to or interfering with the systems operation.

Low Power Consumption

The system is built using highly sensitive low power consumption components, 

maintaining high receiver sensitivity, while consuming as little as one tenth the power of a 

standard FM system, dramatically extending battery life.

Summary of Contents for FS-i4X


























Reviews: