4
Function
4.1 Power on sequence
During power on sequence some important tests are executed.
First the EEPROM data is loaded and verified. In case of fault a warning is given and
the whole EEPROM is formatted.
After this it is checked if free memory is enough to store at least one additional model
memory. In case of fault a warning is given.
After this it is checked the throttle stick is located at its initial position. In case of fault
a warning is given.
Then switches are checked. If any switch is in an on position then the warning screen
is shown that displays the switch values.
Each warning screen can be left with the exit key.
4.2 Data flow
ow we mentioned earlier, this radio works with a very simple calculation
model. Any stick value and any switch value is considered to calculate the
value of the outputs. Special attention is taken to handle any input with the
same priority and without any special function dependent meaning.
H
21