3 Menu structure
3.3.7 Edit Mixer
In this menu you can adjust all the details of one single mixer line.
SRC: select the input channel
RUD, THR, ELE, AIL, P1, P2, P3, X1, X2, X3, X4,
MAX FUL
.
with
MAX
you can emit a constant value 0 or +100%
with
FUL
you can emit a constant value -100% or +100%
PRC: weight from -125% to +125%
CURVE: one of eight curve types.
SWTCH: a switch. Dependent from the SRC-Value the switch acts in two different
manners.
When SRC=MAX or FUL then the switch selects one of two fixed values as input
values and the line is calculated with the whole set of parameters.
When SRC!=MAX or FUL then the switch can switch on the whole line or it can
switch off the whole line. In the last case none of the remaining parameter has any
effect.
SPEED: These two values determine the speed in which rising or falling input val-
ues are propagated to the output channel
RM: This field is used to remove the whole mixer-line.
key
function
1.
move cursor up and down
2a
.
change values
2b
remove whole line,. Tis is only valid when cursor is at
RM
.
2c
edit curve. This is only valid when cursor is at
CV1
-
CV4
3.
leave menu
14