TRIKE FLASH CRUISER - USER MANUAL REL . 2.09-ENG
___________________________________________________________________________
©
Copyright by
FLY
Products
s.r.l.
Page
6
At this point you can proceed to the side drilling to insert the special through pin,
thickened by the two teflon washers, to lock everything with the butterfly bolt.
NOTE:
Proceed with drilling by steps:
1 - Drill
one side at a time
with a
metal drill bit Ø 8
2 - Enlarge the hole
one side at a time
with a metal drill bit Ø 10
3 - Enlarge the hole
one side at a time
with a metal drill bit Ø 12
Side drill purpose is to fit there a through-pin, with two reinforcement washers, to
prevent crushing the tube when the upper cradle will lock in that point.