TRIKE FLASH CRUISER - USER MANUAL REL . 2.09-ENG
___________________________________________________________________________
©
Copyright by
FLY
Products
s.r.l.
Page
21
-
REAR WHEEL ARMS BOLTS
Check the wear and oxidation
conditions of the bolts of the
rear wheel arms, if they are
not in good condition, do not
hesitate, replace them
immediately!
CAUTION:
Bolts on the arm are free to
rotate like the bolts on the
sides of the wheel shafts.
- REAR WHEEL STEEL CABLES
Check the wear and the
oxidation conditions of the steel
cables of the rear wheels, if they
are not in good condition, do not
hesitate, replace them
immediately!
Check the integrity of the cables
near the joints by carefully
bending the cable to check the
broken wires.
-
LOOPS AND CARABINERS
Check wear conditions inside all loops and carabiners, if there are some worn or crack
beginnings, proceed immediately to replace!
-
HARNESS AND BELTS
Check wear conditions of the harness and all belts.
CLEANING
Clean the TRIKE FLASH CRUISER with clean water and mild soap. Dust and dirt can be
wiped off or removed with mild soap and water. Grease and oil can be removed with a
good water-based degreaser.
