ECLIPSE
–
USER MANUAL ____ VER. 1.3 ENG
©
Copyright
FLY
Products
s.r.l.
PAGE 5
The supports of the cage to be mounted on the
central frame are of THREE different lengths as
shown in the figure:
A
: LONG
–
up
B
: AVERAGE
–
center
C
: SHORT
–
low
The other removable part:
D
It is the turret for housing the
engine starting pulley.
The engagement system used "detent
button" or snap button, greatly simplifies
the assembly procedure.
For a correct use, keeping the button
pressed, engage the two parts and rotate
them slightly until the clicking button
comes out of the hole.
For disassembly, just keep the button
pressed down until doing a slight pull and
rotation until the hole is released from the
button thus allowing the separation of the
two parts.
FRAME ASSEMBLY
