Installing the projector- Fig. 3
Safety rope
啊
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING:with the exception of when the projector is positioned on the floor, the safety
rop
e must be fitted.
This must be securely fixed to the support structure of the projector and then connected to the fixing point at
the centre of the base.
啊
灯具可通过橡胶机脚放置在地板上、或安装在桁架、天花板或墙壁上。
警告：除非灯具放置在地板上，否则必须安装安全绳。
要求安全绳必须牢固地固定在灯具支架上，然后连接到底座中心固定点上。
啊
7
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
When suspending the fixture, ensure that the supporting structure and all hardware used
can
hold at least 10 times the weight of all the devices they support.
确保固定灯具的所有零部件都完好无损。
在固定灯具之前请确保固定物是牢固稳定的。
在吊装灯具时，确保支撑结构和所使用的所有配件至少可以保持
10
倍于他们支持的所有设备的重量。
啊
Compact,standard clamp system equipped & easy installation
啊
灯具底座配置有一体化可折叠灯钩，安装更方便，使用更安全
啊
INSTALLATION
AND
CONNECTING/
安装与连接
啊
Summary of Contents for Light Sky TX1940D
Page 7: ...power cord 6 425 188 506 300 436 ATTACHMENT AND BODY SIZE...
Page 25: ...24...
